# Undergraduate Courses

Below on this page are CAEM undergraduate courses with descriptions, prerequisites and syllabi.

See Undergraduate Degrees for coursework requirements in design and analysis and technical electives as well as prerequisite charts and course flowcharts.

Visit Undergraduate Advising to schedule a meeting about course requirements.

Additional information, including fees and grading bases, is available through the UA Catalog under Course Descriptions.

### ARCE 223: Building Technology III: Environmentally Adaptive Systems, EAS

**Units:**3

*This course introduces fundamentals of environmentally adaptive architectural design, including bioclimatics, electromagnetics, fluid physics, and the related interactions with materials, form and spatial composition.*

**Prerequisite(s):**PHYS 102

**Usually offered:**Spring

### CE 210: Engineering Graphics

**Units:**3

*Representations and analysis of systems of orthographic projection and graphical methods used in engineering design and production, correlated with technical sketching.*

**Usually offered:**Fall, Spring

### CE 214: Statics

**Units:**3

*Equilibrium of a particle, equivalent and resultant force systems, equilibrium, geometric properties of areas and solids, trusses, frames and machines, shear force and bending moments, friction. Honors section is available.*

**Prerequisite(s):**PHYS 141 or PHYS 161H, MATH 129 or MATH 250B or concurrently enrolled in MATH 250B

**Usually offered:**Fall, Spring, Summer

### CE 215: Mechanics of Solids

**Units:**3

*Material behavior; relationship between external forces acting on elastic and inelastic bodies and the resulting behavior; stress and deformation of bars, beams, shafts, pressure vessels; stress and strain; combined stresses; columns. Honors section is available.*

**Prerequisite(s):**CE 214

**Usually offered:**Fall, Spring, Summer

### CE 218: Mechanics of Fluids

**Units:**3

*Hydrostatics, continuity, irrotational flow, pressure distributions, weirs and gates, momentum and energy, surface drag, pipe friction, form drag, pipe fitting losses.*

**Prerequisite(s):**CE 214

**Usually offered:**Fall, Spring

### CE 251: Elementary Surveying

**Units:**3

*Theory of measurements and errors; vertical and horizontal control methods; topographic, public land and construction surveys; use of surveying instruments.*

**Prerequisite(s):**MATH 111

**Usually offered:**Fall, Spring

### CE 260: Computer Programming in Civil Engineering

**Units:**1

*This 1-unit course is designed to give students a basic knowledge of MATLAB programming. The course will cover fundamentals of MATLAB operations with arrays (vectors and matrices): how to create script files, function files, use loop and conditional statements, and present the computed results graphically. Students will be required to write simple programs in MATLAB.*

**Prerequisite(s):**MATH 223

**Usually offered:**Spring

### CE 301: Engineering Communications

**Units:**3

*Elements of written and oral communications for engineers including technical writing skills for proposal and report preparation, delivery techniques for oral presentations, and the effective use of audio/visual aids.*

**Usually offered:**Fall

### CE 303: Numerical Analysis for Civil Engineers

**Units:**3

*Topics include: finding roots of nonlinear equations; solution techniques for system of linear equations; curve fitting - polynomial and spline interpolation; least squares fit; numerical differentiation and integration; solution of ordinary differential equations - initial and boundary value problems; and use of MATLAB codes in numerical analysis for solving civil engineering problems.*

**Prerequisite(s):**ENGR 102, MATH 129

**Usually offered:**Fall

### CE 310: Probability and Statistics in Civil Engineering

**Units:**3

*Topics include: statistical decision theory and its application in civil engineering; identification and modeling of non-deterministic problems in civil engineering and the treatment thereof relative to engineering design and decision making; and statistical reliability concepts.*

**Prerequisite(s):**MATH 129

**Usually offered:**Spring

### CE 323: Hydraulic Engineering and Design

**Units:**4

*Topics include: open channel flow, natural streams and waterways, hydrologic analysis and design, pressure flow, analysis and design of pipe networks and pump systems.*

**Prerequisite(s):**CE 218

**Usually offered:**Spring

### CE 323: Hydraulic Engineering and Design

**Units:**4

**Prerequisite(s):**CE 218

**Usually offered:**Spring

### CE 329: Fluid Mechanics Laboratory

**Units:**1

*Topics include: open-channel and closed conduit studies of basic flow phenomena, with emphasis on continuity, conservation of momentum and exchange of energy; and calibration of flow-measuring devices.*

**Prerequisite(s):**Concurrent registration, CE 218

**Usually offered:**Fall, Spring

### CE 333: Elementary Structural Analysis

**Units:**3

*Topics include: analysis of structures - beams, frames and trusses; statically determinate structures; influence lines; deflections by the virtual work method; and statically indeterminate structures using the superposition method.*

**Prerequisite(s):**CE 215

**Usually offered:**Fall

### CE 334: Structural Design in Steel

**Units:**3

*Topics include: design of steel members, connections and simple structures, and an introduction to load and resistance factor design concept, including tension members, laterally supported and unsupported beams, columns, bolted and welded connections.*

**Prerequisite(s):**CE 333

**Usually offered:**Spring

### CE 335: Structural Design in Concrete

**Units:**3

*Topics include: analysis and design of reinforced concrete members subjected to flexure, shear and axial loads; deflection of beams; bond and development of reinforcement.*

**Prerequisite(s):**CE 333

**Usually offered:**Fall

### CE 343: Soil Mechanics

**Units:**3

*In this course, we will discuss the fundamental physical and mechanical properties of soils and use them in the design of simple foundation and earth retaining systems. We will use certain fundamental principles of solid mechanics and fluid mechanics to describe the mechanical behavior of soils.*

**Prerequisite(s):**CE 215

**Usually offered:**Fall

### CE 349: Soils Laboratory

**Units:**1

*Students will conduct and interpret soil test results. Tests include water content, particle size, permeability, consolidation and shear strength.*

**Prerequisite(s):**Concurrent registration, CE 343

**Usually offered:**Fall, Spring

### CE 363: Transport Engineering and Pavement Design

**Units:**3

*Basis for planning, design, and operation of transportation facilities. Driver and vehicle performance characteristics, highway geometric and pavement design principles; traffic analysis and transportation planning.*

**Prerequisite(s):**CE 251

**Usually offered:**Fall

### CE 370L: Environmental and Water Engineering Laboratory

**Units:**1

*The course is supplementary to CHEE/CE 370R, the three-unit introductory environmental engineering course. It consists of a problem-oriented lab that meets weekly for two hours to provide supplementary material for non-chemical engineers taking the introductory course. Emphasis will be on introducing chemistry and biochemistry concepts that support environmental engineering operations for water and wastewater treatment. Basic problem-solving skills in these areas will also be developed.*

**Usually offered:**Spring

### CE 370R: Environmental and Water Engineering Laboratory

**Units:**3

*Covers principles and methods for analysis of environmental engineering issues, including topics such as greenhouse gas effects, tropospheric air pollution, environmental air pollution, environmental risk assessment, surface and ground water pollution, and drinking and wastewater treatment.*

**Usually offered:**Spring

### CE 381: Construction Engineering Management

**Units:**3

*This course provides an opportunity to develop an enhanced understanding of construction industry and practices in preparation to contribute to construction firms, project management consultants, and owners upon graduation and to improve project delivery by understanding linkages between design and construction.*

**Prerequisite(s):**Advanced standing

**Usually offered:**Fall

### CE 389: Materials Testing Laboratory

**Units:**1

*Selected testing of steel, concrete, wood and bituminous materials according to standard test procedures.*

**Prerequisite(s):**CE 215

**Usually offered:**Fall, Spring

### CE 402: Introduction to Finite Element Methods

**Units:**3

*Theory and formulation procedures: energy and residual. One-dimensional problems: stress analysis in axial structures, steady and transient fluid and heat flow, consolidation, wave-propagation, beam-column. Two-dimensional problems: field and plane/axisymmetric, use of computer codes for solution to typical problems.*

**Prerequisite(s):**CE 303

**Cross-listed as:**EM 402

**Usually offered:**Fall

### CE 408A: Issues in Civil Engineering Practice

**Units:**3

*Introduction to non-technical issues impacting the practice of design professionals in the private and public sectors including: types of organizations; income, expenses, and profit; quality-based selection for obtaining and performing work; contracts; dispute resolution methods; professional ethics.*

**Prerequisite(s):**At least two (2) of the following: CE 323, CE 334 or CE 335, CE 343, CE 363, CE 370R and CE 370L; Concurrent registration, CE 301

**Usually offered:**Fall

### CE 408B: Civil Engineering Senior Capstone Design

**Units:**3

*A culminating experience for majors involving a substantive project that demonstrates a synthesis of learning accumulated in the major, including broadly comprehensive knowledge of the discipline and its methodologies. Senior standing required.*

**Prerequisite(s):**CE 301, CE 408 and at least 4 of the following courses: CE 323, CE 334 or CE 335, CE 343, CE 363, CE 370R and CE 370L

**Usually offered:**Spring

### CE 410: Probability in Civil Engineering

**Units:**3

*Outlines the extent of uncertainties under which civil engineering designs and decisions are made. Theory and application. Advanced topics in risk-based engineering design. System reliability concepts. Statistical decision theory and its application in civil engineering. Identifying and modeling, nondeterministic problems in engineering in understanding many recently issued engineering codes.*

**Prerequisite(s):**MATH 129, CE 310

**Usually offered:**Fall, Spring

### CE 411: Research Methods and Data Analysis in Civil Engineering

**Units:**3

*This course introduces students to the concepts of the conduct of research in an empirical setting.*

**Prerequisite(s):**CE 310

**Usually offered:**Fall

### CE 422: Open-Channel Flow

**Units:**3

*Differential equations governing unsteady flow in open channels. Simple surface waves in subcritical and supercritical flows. Introduction of kinematic, diffusion and dynamic wave methods. Applications to reservoir routing, dam break flow and overland flow.*

**Prerequisite(s):**CE 323 or consent of instructor

**Usually offered:**Fall, Spring

### CE 423: Hydrology

**Units:**3

*Discussion and analysis of major topics of the hydrologic cycle and their interrelationship, such as rainfall, infiltration, evaporation and runoff. Statistical and probabilistic methods in water supply and flood hydrology.*

**Prerequisite(s):**CE 218

**Usually offered:**Fall

### CE 426: Watershed Engineering

**Units:**3

*Design of waterways, erosion control structures and small dams. Methods for frequency analysis and synthetic time distribution of rainfall. Methods for estimating infiltration and runoff from small watersheds, flow routing and stormwater management. Estimating erosion using the Revised Universal Soil Loss Equation.*

**Prerequisite(s):**CE 218 or AME 331

**Usually offered:**Fall

### CE 427: Computer Applications in Hydraulics

**Units:**3

*Computer modeling of surface water hydrology, flood plain hydraulics and water distribution systems. Theoretical basis. Application and design studies.*

**Prerequisite(s):**CE 323 or consent of instructor

**Usually offered:**Fall

### CE 429: Special Topics in Hydraulics & Water Resources Engineering

**Units:**3

*Selected advanced topics will be covered in the fields of hydraulics and water resources engineering with emphasis on analysis and design of water systems.*

**Prerequisite(s):**Consent of instructor

**Usually offered:**Fall, Spring

### CE 432: Advanced Structural Design in Steel

**Units:**3

*Advanced problems in the analysis and design of steel structures including beam columns, plate girders, composite construction, multi-story buildings, static and dynamic lateral and vertical loads, connections, computer applications.*

**Prerequisite(s):**CE 334

**Usually offered:**Fall

### CE 434: Design of Wood and Masonry Structures

**Units:**3

*Determination of gravity and lateral loads on structures. Design of wood structures for axial load and bending; structural wood panels, diaphragms and shear walls. Types of masonry construction. Design of masonry structures for gravity and lateral loads.*

**Prerequisite(s):**Concurrent registration, CE 333

**Usually offered:**Fall, Spring

### CE 435: Prestressed Concrete Structures

**Units:**3

*Behavior, analysis and design of statically determinate and indeterminate prestressed concrete structures; calculation of loss of prestress.*

**Prerequisite(s):**CE 333, CE 335

**Usually offered:**Spring (alternating)

### CE 437: Advanced Structural Design in Concrete

**Units:**3

*Advanced problems in the analysis and design of concrete structures, design of slender columns and one- and two-way slabs; lateral and vertical load analysis of bridges and multistory buildings; introduction to design for torsion and seismic forces; use of structural computer programs.*

**Prerequisite(s):**CE 333, CE 335

**Usually offered:**Spring (alternating)

### CE 438: Behavior and Design of Structural Systems

**Units:**3

*Structural systems, gravity load resisting systems, lateral force resisting systems, tall building design, computer structural analysis, structural steel, reinforced concrete, building codes, seismic resistant design.*

**Prerequisite(s):**CE 333, CE 334, and CE 335 not required but strongly recommended

**Usually offered:**Spring

### CE 440: Foundation Engineering

**Units:**3

*Settlement and bearing capacity of shallow and deep foundations; beam on elastic foundation; design of footings and pile foundations; foundations on metastable soils; the use of computer codes for foundation problems.*

**Prerequisite(s):**CE 343

**Usually offered:**Spring

### CE 441: Earth Structures in Geotechnical Engineering

**Units:**3

*Stability analysis for earth slopes, including planar, circular piecewise-linear, and composite-surface methods: analyses for static and steady-flow conditions; earth pressure theories and calculations for generalized conditions; design of rigid and flexible retaining structures; design of braced and tie-back shoring systems; design of reinforced earth walls; computer-aided analysis and design.*

**Prerequisite(s):**CE 343

**Usually offered:**Fall

### CE 442: Ground Improvement

**Units:**3

*This course will talk about different ground improvement techniques including those without addition of materials, by adding materials and using reinforcing elements. During the course, opportunities will be given to students to develop a range of generic skills including written communication skills, problem-solving skills and analysis and critical evaluation skills. Upon successful completion of this course, the student will be able to understand the principles, applications and design procedures for various ground improvement techniques; use analytical/theoretical/numerical calculations to assess the effectiveness of a ground improvement technique; gain competence in properly evaluating alternative solutions; and the effectiveness before, during and after using ground improvement.*

**Prerequisite(s):**CE 343 or consent of instructor

**Usually offered:**Fall

### CE 444: Special Topics in Geomechanics

**Units:**3

*Introduction to geoenvironmental engineering; physiochemical and microstructural behavior of geomaterials, effect of pollutants, design of waste disposal systems; advanced laboratory testing, geotextiles, space geomechanics, etc.*

**Prerequisite(s):**CE 343 or consent of instructor

**Usually offered:**Spring (alternating)

### CE 445: Geoenvironmental Engineering

**Units:**3

*Waste generation and disposal regulations; types and characterization of wastes, engineering properties of soil-water-contaminants; use of earth and geosynthetic materials in waste containment applications; evaluation, design and construction of liner and leachate collection systems used in landfills and heap leach mining; remediation of contaminated sites.*

**Prerequisite(s):**CE 343

**Usually offered:**Fall, Spring

### CE 446: Geotechnical Earthquake Engineering

**Units:**3

*Review of plate tectonics and seismology, analysis of earthquake ground motions, travel path and distance effects, and site response effects. Soil liquefaction susceptibility, identification and mitigation. Introduction to seismic slope stability.*

**Prerequisite(s):**CE 343

**Usually offered:**Fall

### CE 448: Numerical Methods in Geotechnical Engineering

**Units:**3

*Brief statements and applications of numerical methods based on closed-form solutions, finite difference and finite element methods for problems involving soil structure interaction such as piles, retaining walls, group piles, underground works; seepage; and consolidation.*

**Prerequisite(s):**CE 402, CE 343

**Usually offered:**Spring

### CE 449: Statistical Hydrology

**Units:**3

*Application of statistics and probability to uncertainty in the description, measurement, and analysis of hydrologic variables and processes, including extreme events, error models, simulation, sampling.*

**Prerequisite(s):**SIE 305 or MATH 461 or equivalent calculus-based probability/statistics course

**Usually offered:**Spring

### CE 455: Soil and Water Resources Engineering

**Units:**3

*Introduction to soil and water relationships, irrigation systems, irrigation water supply, and irrigation management; basic designs.*

**Prerequisite(s):**CE 218 or AME 331

**Usually offered:**Fall

### CE 456: Irrigation Systems Design

**Units:**3

*Design and operation of surface, sprinkler, and trickle irrigation systems based on economic and environmental criteria.*

**Prerequisite(s):**CE 218 or AME 331

**Usually offered:**Fall

### CE 458: Soils, Wetlands and Wastewater Reuse

**Units:**3

*Water quality and system design for agricultural drainage and wastewater systems.*

**Prerequisite(s):**CE 218 or AME 331

**Usually offered:**Spring

### CE 460: Special Topics in Transportation Engineering

**Units:**3

*Selected advanced topics will be covered in the field of transportation engineering, with emphasis on analysis and design of transportation systems.*

**Prerequisite(s):**CE 363 or consent of instructor

**Usually offered:**Fall, Spring

### CE 462: Traffic Engineering and Operations

**Units:**3

*Introduction to traffic system design concepts, control components, management strategies, and tools for evaluating their effectiveness.*

**Prerequisite(s):**CE 363 or consent of instructor

**Usually offered:**Spring (alternating)

### CE 463: Traffic Flow and Capacity Analysis

**Units:**3

*Methods for the efficient and safe operation of transport facilities through analysis of capacity, safety, speed, parking and volume data.*

**Prerequisite(s):**CE 363

**Usually offered:**Spring (alternating)

### CE 464A: Integrated Highway Bridge Design Using LRFD Methodology

**Units:**3

*Methods for the integrated design of components typically found in transportation structures including bridge super- and sub-structures, retaining walls, pavements, highway geometrics, traffic, drainage, etc. Taught by practicing engineers.*

**Prerequisite(s):**CE 310, CE 323, CE 343, and CE 363. Concurrent registration, CE 335

**Usually offered:**Spring

### CE 465: Transportation Data Management and Analysis

**Units:**3

*This course introduces important concepts of database design and application. Popular database and analytical tools are introduced and demonstrated using traffic sensor data, roadway geometric data and traffic accident data. The objective is to introduce modern concepts, algorithms and tools for transportation data management and analysis. With the instructions, assignments and projects in this course, students are expected to learn database design theories; analytical methods for capacity, safety and time series analyses; and skills on popular software tools for transportation data management and analysis.*

**Prerequisite(s):**Contact department

### CE 466: Highway Geometric Design

**Units:**3

*Study of geometric elements of streets and highways, with emphasis on analysis and design for safety. Offered every third semester.*

**Prerequisite(s):**CE 363

**Usually offered:**Fall (alternating), Spring (alternating)

### CE 468: Urban Transportation Planning

**Units:**3

*Transportation planning in relation to urban development; techniques and procedures for developing long-range regional plans.*

**Usually offered:**Fall (alternating)

### CE 469: Travel Demand Modeling

**Units:**3

*Detailed investigation of methods to model travel demand, covering data collection and analysis, model development, and forecasting applications.*

**Prerequisite(s):**CE 363

**Usually offered:**Spring

### CE 473: Biodegradation of Hazardous Organic Compounds

**Units:**3

*Students will learn and integrate the basic principles of microbiology required for understanding of application of bioremediation to contaminated sites; become familiar with current research in bioremediation; and learn to solve problems often encountered in application of bioremediation.*

**Usually offered:**Spring

### CE 476A: Water Treatment System Design

**Units:**3

*Application of theory and engineering experience to the design of unit operations for the production of potable water. Covers water regulations, conventional treatment technologies and selected advanced treatment topics.*

**Prerequisite(s):**CE 370R and 370L are recommended for Civil Engineering majors.

**Usually offered:**Fall

### CE 476B: Wastewater Treatment Design System

**Units:**3

*Application of theory and engineering experience to the design of unit operations for the treatment of wastewater. Covers water regulations, conventional treatment technologies and selected advanced treatment topics.*

**Usually offered:**Spring

### CE 478: Introduction to Hazardous Waste Management

**Units:**3

*Management, planning, legal and engineering aspects of liquid and solid hazardous waste treatment and disposal.*

**Prerequisite(s):**Consult department before enrolling.

**Usually offered:**Spring

### CE 482: Construction Project Planning, Scheduling, and Control

**Units:**3

*Develop an enhanced understanding of construction project planning, scheduling, execution and control in preparation to contribute to construction firms, project management consultants and owners upon graduation. Topics include network scheduling, critical path method, resource allocation, cost control, software applications to scheduling and contract documents.*

**Usually offered:**Contact Department

### CE 483: Construction Cost Estimating

**Units:**3

*Develop an enhanced understanding of quantity take-off and cost estimating of construction resources including materials, labor and equipment. Skills and knowledge of cost estimating will provide preparation for builders and designers to contribute to construction firms, project management consultants, and owners upon graduation. Topics include: types of cost estimates, budget estimates, pre-construction services estimates, quantity take-off, self-performed estimates, subcontractor work estimates and bid preparation.*

**Usually offered:**Contact Department

### CE 484: Fundamentals of Industrial and Environmental Health

**Units:**3

*Introduction to the principles of occupational and environmental health, with emphasis on industrial hygiene aspects of recognition, evaluation, and control of environmental and industrial health hazards.*

**Usually offered:**Fall

### CE 485: Construction Equipment and Methods

**Units:**3

*Develop an enhanced understanding of construction equipment and methods to contribute to construction firms, project management consultants and owners upon graduation. Topics include: costing, safety, earth moving equipment, cranes, creating and securing deep digs, constructing deep foundations, and forms and temporary structures.*

**Prerequisite(s):**MATH 129 or MATH 250B, CE 381 or equivalent

**Usually offered:**Spring

### EM 402: Introduction to Finite Element Methods

**Units:**3

*Theory and formulation procedures: energy and residual. One-dimensional problems: stress analysis in axial structures, steady and transient fluid and heat flow, consolidation, wave-propagation, beam-column. Two-dimensional problems: field and plane/axisymmetric, use of computer codes for solution to typical problems.*

**Prerequisite(s):**CE 303

**Cross-listed as:**CE 402

**Usually offered:**Fall

### ENGR 495: Engineering Leadership

**Units:**1

This course is intended to prepare students to develop leadership competencies throughout their engineering careers by providing a basic understanding of concepts relevant to leadership in engineering. Additionally, students will analyze their own leadership competencies and prepare a personal leadership development plan. Engineers from industry will regularly visit class to share their experiences and knowledge about leadership in engineering. Significant interaction between students and industry guests is expected.

**Usually offered:**Spring